We released a new tutorial showing how to remove prop flicker, so if you have flicker problems on drone footage, check that out. (It’s also at the bottom of this post)
But what if you want to avoid prop flicker altogether? Here’s a few tips:
But first, let’s take a look at what it is. Here’s an example video:
1- Don’t shoot in such a way that the propellers are between the sun and the camera. The reason prop flicker happens is the props are casting shadows onto the lens. If the sun is above and in front of the lens, that’s where you’ll get the shadows and the flicker. (shooting sunrise or sunset is fine because the sun is below the props)
1b- Turning the camera just slightly from the angle generating the flicker will often get rid of the flicker. You can see this in the tutorial below on removing the flicker.
2- Keep the camera pointed down slightly. It’s more likely to catch the shadows if it’s pointing straight out from the drone at 90 degrees (parallel to the props). Tilt it down a bit, 10 or 20 degrees, and that helps a lot.
3- I’ve seen lens hoods for the cameras. Sounds like they help, but I haven’t personally tried one.
Unfortunately sometimes you have to shoot something in such a way that you can’t avoid the prop flicker. In which cases using a plugin like Flicker Free allows you to eliminate or reduce the flicker problem. You can see how to deflicker videos with prop flicker in the below tutorial.
2 thoughts on “Avoiding Prop Flicker when Shooting Drone Video Footage”
Finally… a way to use that flicker footage… Thanks Jim
You’re welcome! Good to hear from you… hope things are well!